This file has been tested on multiple types of printers.
Graveyard Skeleton – Backhand
- This is a digital file only
- You will need to print this file on a 3D printer
- This file is intended for personal use only
1 review for Graveyard Skeleton – Backhand
01 Customer(s) recommended this item
Reviewed by 01 customer(s)
Good, detailed print, but have to be really careful removing supports. My pictures don’t do the details justice.
Disclaimer: this model was originally intended to be printed in resin, and I printed it using filament instead. In order to do this, I had to enable supports. The following may not occur when printed in resin.
Obviously this model is going to be super delicate, so trying to remove all the supports from it is super anxiety-inducing. The hardest part to remove was the ball of support material that winds up forming in the abdominal cavity. Just work really slow and have some very finely-pointed tools available, and you’ll be fine.
Ender 3 Pro w/ modifications
Resin / Filament Used:
Inland PLA White (1.75mm)
Slicing Software Used:
Layer Height: 0.12 mm
Line Width: 0.4 mm
Infill Density: 30%
Infill Pattern: Gyroid
Printing Temperature: 200 C
Build Plate Temperature: 60 C
Print Speed: 50 mm/s
Enable Retraction: True
Support Type: TreeNovember 13, 2020Verified Purchase